Hook hanging weight foam tape foam tape 
 The EVA / High density PE foam as substrate, coated on one side or both sides with solvent-based or hot-melt pressure-sensitive adhesive, then covered with release paper or release film made of. 
 Features: Strong adhesion, excellent damping properties and anti-cracking, good weather resistance and durability, with a high cover of paste, water, heat, strong anti-chemical ability. 
 Uses: PE / EVA foam with good isolation and cushioning properties, used for furniture, construction, decoration of the flexible connection, car foam for surface roughness and irregular surface, pasted plate, logo, mirrors, maps, etc., can also be used silencer and shock absorber in the packaging of electronic components, glass and other solid surface pad. 
 Specifications: semi-maximum width 1040mm (practical 1020mm), the maximum length according to the thickness of the thickness of 1mm ~ 4mm (size can be set according to customer requirements). Can be made into a variety of red-type pattern, the manufacturers welcome to inquire. 



 3M467 3M468 
 Size: 1270MM * 55M 
 Thickness: 0.05mm 
 Substrate: no substrate 
 Cutting process can be die-cut, sticky and strong, high temperature. 
 3M467 3M double-sided adhesive is in a non-substrate double-sided adhesive, directly from the C Xi sour coating made of plastic, transparent color tape, glue lines are 3M200MP series, still has excellent adhesion and can prevent the loss and excellent water resistance, good processing, good heat resistance, better hold tack; release paper for the polymer coating of waterproof kraft paper, in a high humidity environment will not wrinkle; temperature resistance, long-term temperature 149 ℃, short-term temperature up to 204 ℃ 



 3M468 3M467 
 Specification: 1219MM * 55M * 0.13MMT 
 3M468 3M double-sided adhesive is in a non-substrate double-sided adhesive, directly from the C Xi sour coating made of plastic, transparent color tape, glue lines are 3M200MP series, still has excellent adhesion and can prevent the loss and excellent water resistance, good processing, good heat resistance, better hold tack; release paper for the polymer coating of waterproof kraft paper, in a high humidity environment will not wrinkle; temperature resistance, long-term temperature 149 ℃, short-term temperature up to 204 ℃ 
 Application technology: 
 Bonding strength with adhesive contact area with the sticky surface increased with the increase, applied steady pressure to help with the sticky adhesive surface contact, thereby increasing the adhesive strength. 
 To achieve the best bonding results, bonding surface must be clean, dry, tape application temperature range is the best 21-38 ℃, recommended if the initial bonding temperature below 10 ℃, suitable for bonding, Therefore, when the adhesive is too hard, but not firm adhesion to the object; However, if you have bonding on low temperature tack under the same holding is satisfactory. 
 Application: 
 3M468 double-sided adhesive in environmental protection in line with ROHS regulations, for the panel paste, metal plate, electrical parts, shock foam paste and so on.